HIGH-PRESSURE steam generators.
Power to Heat Generators
High-pressure electrode boilersWith capacities of up to 60MW and 85 bar pressure. They are designed to replace boilers fueled by fossil fuels. They represent a significant shift in the industrial decarbonization process.
“Power to Heat” steam generators are the ideal solution for companies facing an energy transition or that, due to their location, must comply with strict emission limits imposed.
The electric alternative for generating large amounts of steam is now a reality.
Steam generation of up to 90 tons per hour.
Up to 100 bar working pressure.
99% efficiency.
Zero CO2 emissions.
You can contact usfor assistance in choosing the most suitable option.
Technology designed to replace fossil fuels.
High-pressure steam
High and medium-pressure boilers can contribute to reducing NOx and CO2 emissions from large industrial companies by replacing fossil fuel-fed boilers with electric steam production of up to 85 barg of design pressure. This will bring about a significant change in decarbonizing high-capacity steam production.
Wide power ranges
Our product range includes hot water and steam boilers with a power range of 1 to 90 MW. These boilers are designed for a supply voltage of 6 – 36 kV. Their compact construction, quick start-up times, and zero-emission heat generation make them ideal for a wide range of industrial applications.
Integration with renewable energies.
The coupling of the electrical grid with district heating networks (Power-to-Heat) maximizes the utilization of renewable energy sources without compromising the stability of the electrical grid Our boilers convert short-term excess electricity generation from solar and wind energy into heat, which can be supplied to the district heating network or industrial processes. Carbon emissions and fuel costs are reduced through the replacement of fossil fuel-powered boilers.
Grid balancing
Electrode steam generators can be utilized to store energy and use it to stabilize the grid frequency, compensating for fluctuations and mismatches between producers and consumers.
Power2X Generator
High voltage electric steam generators
They are known for their ability to generate large amounts of steam. These systems are designed to handle high workloads and produce steam at high pressures and temperatures, making them ideal for industrial companies with high steam demands.
Power ranges from 2MW to 60MW.
Capacity to produce up to 90 tons/hour of high-pressure steam.
Steam generated at a maximum pressure of 100 bar.
Can be used for industrial processes, as a heat source in central heating systems, or for water heating.
In just a few minutes, it can be operating at full capacity.
| Model | P2X – 1 | P2X – 2 | P2X – 3 | P2X – 4 | P2X – 5 |
| Total power (MW) | 2 – 5 | 5 – 15 | 15 – 30 | 30 – 45 | 45 – 60 |
| Steam production (tons/h) | 7,5 | 22,5 | 45 | 67,5 | 90 |
| Operating weight (kg) | 8.500 | 11.000 | 21.500 | 34.000 | 38.000 |
Steam generator accessories
A wide range of options available to optimize the performance of your steam installation.
The accessories include pressure reduction systems, clean steam filters, water treatment solutions, steam traps, among others. All these accessories are designed to adapt to and enhance your steam installation, ensuring efficient and safe operation.
Applications of steam boilers
Industries where steam is a crucial part of their production process.
Industrial steam boilers are essential in applications such as material sterilization or as a vital component in the manufacturing of various products in diverse sectors such as bakery and pastry, pharmaceutical and healthcare, brewing industry, or biotechnology.
FAQs
We understand that many questions may arise. Here are some of the most common ones.
There are no emissions beyond those produced during the electricity production process. Consequently, emissions can be neutral depending on the electricity mix. Electric steam boilers are the present and the future.
Absolutely. In fact, it is recommended to achieve maximum efficiency. There is no problem with remote control as long as it complies with current regulations.
A steam generator is a pressure vessel that, together with the piping network, is subject to regulatory control and complementary technical instructions, according to the regulations published in Royal Decree 809/2021, of September 21. Maintenance is divided into a part that can be easily fulfilled by the owner:
- Know and apply the manufacturer’s instructions regarding use, safety measures, and maintenance.
- Not to put the installation into service or prevent the operation of pressure equipment if the requirements of the Regulation are not met.
- Having at least the following documentation for the pressure equipment while they are installed: Declaration of conformity, manufacturer’s instructions (if applicable), and, if necessary, installation certificate, along with other supporting documentation (such as installation project, record of the last periodic inspection, certifications of equipment repairs or modifications, and any other documentation required by the relevant technical instruction complementary to this regulation). For detailed contents, refer to Annex IV of the regulation. Making this documentation available to the competent authority of the autonomous community and the companies responsible for maintenance, repair, or periodic inspections.
- Use the pressure equipment within its intended operating limits as specified by the manufacturer and take it out of service if it no longer meets the necessary safety requirements.
- Perform maintenance on the installations, pressure equipment, safety accessories, and control devices in accordance with the operating conditions and manufacturer’s instructions, and examine them at least once a year.
- Arranging for the necessary periodic inspections as required by Article 6 of the regulation.
- Having and maintaining an up-to-date record of pressure equipment categories I to IV, as defined in RD 709/2015, of July 24, or equipment similar to these categories according to Article 3.2 of the regulation, as well as their installations.
It is known that by applying heat to water, it transforms into steam at the boiling point and atmospheric pressure. From there, depending on the required saturation degree of steam for its proper application, we need to increase the pressure to obtain a higher temperature. To change the temperature and saturation degree of steam, we always need to modify the pressure.
It is a unit of pressure equivalent to 1 kg/cm2, 0.98 atmospheres, or 14.50 PSI.
Haven't found the answers to your questions?
Please send us a question or download all the information
Some advantages of our electric steam generators
compared to other steam production methods are as follows:
- No installation project is required.
- Installation or transport to the place of need is possible, saving in the construction of the distribution network and less heat loss in the same.
- No need for a boiler room.
- Greater flexibility and reduced dependence on centralized production (possibility of sectorizing the installation).
- Lower maintenance costs.
- Significantly shorter startup times.
Quick technical service, with trained professionals and service plans focused on your company
What kind of steam system do you need?
Equipment rental
Reliable, safe equipment with a 5-year warranty.
Enjoy the security of a personalized service
24/7 adapted to your needs.
Giconmes technology blog
Here you will find informative articles about steam technology, its application in industry, and different types of related equipment, as well as the latest trends, installations we have created and new developments in boilers or steam generators for the entire industry.
