HIGH-PRESSURE steam generators.
Power to Heat Generators
High-pressure electrode boilersWith capacities up to 60MW and 85 bar pressure. They are designed to replace fossil fuel-fired boilers. They represent a major change in the industrial decarbonization process.
“Power to Heat” steam generators are the ideal solution for companies facing an energy transition or that, due to their location, must comply with strict emission limits imposed.
The electric alternative for generating large amounts of steam is now a reality.
Steam generation of up to 90 tons per hour.
Up to 100 bar working pressure.
99% efficiency.
Zero CO2 emissions.
You can contact usfor assistance in choosing the most suitable option.
Technology designed to replace fossil fuels.
High-pressure steam
High- and medium-pressure boilers can help reduce NOx and CO2 emissions from large industrial companies by replacing fossil fuel-fired boilers with electric steam production up to 85 barg design pressure. This will be a major step change in decarbonizing high-capacity steam production.
Wide power ranges
Our product range includes hot water and steam boilers with an output of 1 to 90 MW. These boilers are designed for a supply voltage of 6 – 36 kV. Their compact construction, fast start-up times and zero-emission heat generation make them ideal for a wide range of industrial applications.
Integration with renewable energies.
Power-to-Heat coupling maximizes the use of renewable energy sources without compromising the security of the power grid. Our boilers convert short-term surplus electricity generation from solar and wind energy into heat, which can power the district heating network or industrial processes. Carbon emissions and fuel costs are reduced thanks to the reduction of fossil-fueled boilers.
Grid balancing
Electrode steam generators can be utilized to store energy and use it to stabilize the grid frequency, compensating for fluctuations and mismatches between producers and consumers.
Power2X Generator
High voltage electric steam generators
They are known for their ability to generate large amounts of steam. These systems are designed to withstand high workloads and produce steam at high pressures and temperatures, making them ideal for industrial companies with high steam demands.
Power ranges from 2MW to 60MW.
Capacity to produce up to 90 tons/hour of high-pressure steam.
Steam generated at a maximum pressure of 100 bar.
Can be used for industrial processes, as a heat source in central heating systems, or for water heating.
In just a few minutes, it can be operating at full capacity.
| Model | P2X – 1 | P2X – 2 | P2X – 3 | P2X – 4 | P2X – 5 |
| Total power (MW) | 2 – 5 | 5 – 15 | 15 – 30 | 30 – 45 | 45 – 60 |
| Steam production (tons/h) | 7,5 | 22,5 | 45 | 67,5 | 90 |
| Operating weight (kg) | 8.500 | 11.000 | 21.500 | 34.000 | 38.000 |
Steam generator accessories
Wide range of options to optimize the performance of your steam installation
Accessories include pressure reduction systems, clean steam filters, water treatment, steam traps, among others.
All these accessories are designed to adapt and improve your steam installation, ensuring efficient and safe operation.
Applications of steam boilers
Industries where steam is part of the production chain.
Industrial steam boilers are essential in applications such as sterilization of materials or as an important part of the manufacturing of various products in sectors as diverse as bakery and confectionery, pharmaceuticals and healthcare, brewing and the biotechnology industry.
FAQs
We understand that many questions arise. Here are some of the most common ones.
There are no pollutant emissions beyond those produced in the electricity production process, therefore, they can become neutral depending on the electricity mix.
Electric steam boilers are the present and the future.
Perfectly.
It is even recommended for maximum efficiency.
There is no problem in remote control as long as the current regulations are respected.
A steam generator is a pressurized equipment that, together with the piping network it affects, is subject to regulatory control and complementary technical instructions, according to Regulation published in Royal Decree 809/2021, of September 21.
Its maintenance is divided into a part of simple compliance by the owner:
- Know and apply the manufacturer’s instructions regarding use, safety measures, and maintenance.
- Not to put the installation into service or prevent the operation of pressure equipment if the requirements of the Regulation are not met.
- Having at least the following documentation for the pressure equipment while they are installed: Declaration of conformity, manufacturer’s instructions (if applicable), and, if necessary, installation certificate, along with other supporting documentation (such as installation project, record of the last periodic inspection, certifications of equipment repairs or modifications, and any other documentation required by the relevant technical instruction complementary to this regulation). For detailed contents, refer to Annex IV of the regulation. Making this documentation available to the competent authority of the autonomous community and the companies responsible for maintenance, repair, or periodic inspections.
- Use the pressure equipment within its intended operating limits as specified by the manufacturer and take it out of service if it no longer meets the necessary safety requirements.
- Perform maintenance on the installations, pressure equipment, safety accessories, and control devices in accordance with the operating conditions and manufacturer’s instructions, and examine them at least once a year.
- Arranging for the necessary periodic inspections as required by Article 6 of the regulation.
- Having and maintaining an up-to-date record of pressure equipment categories I to IV, as defined in RD 709/2015, of July 24, or equipment similar to these categories according to Article 3.2 of the regulation, as well as their installations.
It is known that by applying a heat source to water, it is transformed into steam from the boiling point and at atmospheric pressure.
From this point on, depending on the required degree of saturation of the steam for its correct application, we will have to increase the pressure in order to obtain a higher temperature.
To change the temperature and degree of saturation of the steam, we must always modify the pressure.
It is a unit of pressure equivalent to 1 kg/cm2, 0.98 atmospheres, or 14.50 PSI.
Haven't found the answers to your questions?
Please send us a question or download all the information
Some of the advantages of our electric steam generators
over other sources of steam production are the following:
- No installation project is required.
- Installation or transport to the place of need is possible, saving in the construction of the distribution network and less heat loss in the same.
- No need for a boiler room.
- Greater flexibility and reduced dependence on centralized production (possibility of sectorizing the installation).
- Lower maintenance costs.
- Significantly shorter startup times.
Quick technical service, with trained professionals and service plans focused on your company
What kind of steam system do you need?
Equipment rental
Reliable, safe equipment with a 5-year warranty.
Enjoy the security of a personalized service
24/7 adapted to your needs.
Giconmes technology blog
Here you will find informative articles about steam technology, its application in industry, and different types of related equipment, as well as the latest trends, installations we have created and new developments in boilers or steam generators for the entire industry.
