Industrial steam generators

Pharmacy and Healthcare industria farmacia. Giconmes industrial steam generators

Injectable clean steam for water

Pharmacy and Healthcare

Steam for the cosmetics, pharmaceutical, and healthcare industries

The manufacturing of pharmaceuticals and cosmetic products is one of the most complex processes in the industrial sector. Therefore, precision is crucial throughout the entire production process.

NEED ASSISTANCE?

Scroll

Steam boilers for the pharmaceutical sector

Quality steam for the pharmaceutical industry

Pharmacy and Healthcare LINE. Giconmes industrial steam generators

The proper synergy between pressure, time, and temperature determines the production of products directly related to our health, well-being, and appearance.

GICONMES brings over 60 years of accumulated know-how to the sector. Clean steam, derived from pre-treated water, is free from amines and hydrazines, allowing compliance with the strictest pharmacopeia standards for injectable water.

In the pharmaceutical industry, as well as in the manufacturing of health-related products, steam quality requirements must be maximized to achieve desired results in the production process.

In these processes, steam is used for heat transfer and sterilization. Due to the strict thermal hygiene requirements, it is important to avoid corrosion to prevent production shutdowns. This is when we talk about “clean steam,” the purest possible, meeting the most demanding requirements to achieve the best results in these types of industries.

At Giconmes, by prioritizing the manufacturing of our generators in stainless steel, we ensure effective and efficient generation and supply of “clean steam.” We maintain complete control in all phases, preserving steam generation capacity and eliminating all possible risks.

Steam Generators

Most commonly used models in the textile industry

Steam Generator NGV 08 NGV08. Giconmes industrial steam generators
Pharmacy and Healthcare rectangle blue. Giconmes industrial steam generators

Electric steam generator with 2 available configurations. It offers a variable power range of 6 to 9 kW, with an 8-liter capacity and a steam production of up to 12 kg/h.

Steam Generator NGV 17 NGV08 1. Giconmes industrial steam generators
Pharmacy and Healthcare rectangle blue. Giconmes industrial steam generators

The NGV 17 electric steam generator offers two available configurations Power variable from 9 to 15 kW, with a 17-liter boiler and a steam production capacity of up to 20 kg/h.

NGV 30 Steam Generator NGV17 1. Giconmes industrial steam generators
Pharmacy and Healthcare rectangle blue. Giconmes industrial steam generators

Electric steam generator with 4 available configurations. Offers variable power from 18 to 48 kW, with a 30-liter boiler and steam production of up to 64 kg/h.

Steam generator NGV 60 NGV6060 Correct size. Giconmes industrial steam generators
Pharmacy and Healthcare rectangle blue. Giconmes industrial steam generators

Fixed steam generator with 6 available configurations. Offers variable power from 20 to 60 kW, with a 60-liter boiler and steam production of up to 80 kg/h.

Would you like to learn about real-life cases similar to yours?

Pharmacy and Healthcare CTA 4. Giconmes industrial steam generators

Do you have any doubts to solve? Our team of professionals is here to assist you

Pharmacy and Healthcare dot. Giconmes industrial steam generatorsFAQs.

We understand that many questions may arise. Here are some of the most common ones:

There are no emissions other than those generated in the electricity production process. Therefore, they can be neutral depending on the electric power mix. Electric steam boilers are the present and the future.

Absolutely. In fact, it is recommended to achieve maximum efficiency. There is no problem with remote control as long as the current regulations are respected.

A steam generator is a pressure vessel that, along with the network of pipes, is subject to regulatory control and complementary technical instructions, as stated in the Regulation published in Royal Decree 809/2021, dated September 21st. The maintenance is divided into a part that is simple for the owner to fulfill:

  1. Familiarize yourself with and apply the manufacturer’s instructions regarding the use, safety measures, and maintenance.
  2. Do not put the installation into service or prevent the operation of pressure equipment if the requirements of the Regulation are not met.
  3. Keep at least the following documentation of the pressure equipment while they are installed: Declaration of conformity, manufacturer’s instructions if applicable, and, if applicable, installation certificate, along with other supporting documentation (such as Installation Project, a record of the last periodic inspection, certifications of equipment repairs or modifications, as well as any other documentation required by the corresponding complementary technical instruction (ITC) of this regulation). For specific details, please refer to Annex IV of the regulation. This documentation should be made available to the competent authority of the autonomous community and to companies performing maintenance, repair, or periodic inspections.
  4. Use the pressure equipment within its intended operating limits as specified by the manufacturer and take it out of service if it no longer meets the necessary safety requirements.
  5. Perform maintenance on the installations, pressure equipment, safety accessories, and control devices in accordance with the operating conditions and manufacturer’s instructions, ensuring they are inspected at least once a year.
  6. Arrange for the performance of the periodic inspections corresponding to them in accordance with the provisions of Article 6 of the regulation.
  7. Maintain an up-to-date record of the pressure equipment belonging to categories I to IV, as defined in RD 709/2015, of July 24, or equipment assimilated to these categories according to Article 3.2 of the regulation, as well as their installations.

It is known that by applying heat to water, it transforms into steam at the boiling point under atmospheric pressure. From there, depending on the required degree of steam saturation for its proper application, we need to increase the pressure to obtain higher temperature. To change the temperature and saturation level of steam, the pressure must be modified.

It is a unit of pressure equivalent to 1 kg/cm², 0.98 atmospheres, or 14.50 PSI.

Couldn't find answers to your questions?

Send us a question or download all the information.

    This can be an H2 headline.

    Other Industries that use steam for similar procedures

    Pharmacy and Healthcare LINE. Giconmes industrial steam generators
    Canning Industry industria conservas. Giconmes industrial steam generators

    GICONMES designs and develops equipment and processes that are fully tailored to the food industry, taking into account the specific needs and characteristics of each product and sector.

    Flecha
    Biotechnology CTA 3. Giconmes industrial steam generators

    Electric steam boilers from Giconmes are employed in various stages of production and processing of biotechnological products.

    Flecha